White King Mould & Soap Scum Remover Spray 500ml
Product ID: 2646614$4.99
$0.21 Off RRP
Don't Pay RRP $5.20
Select your location to check stock
Enter your location to check stock levels in-store and online.
White King Mould + Soap Scum Remover Lemon 500ml
• Multi-purpose spray for the bathroom• Delivers a powerful clean to hard surfaces
• Very tough on mould and soap scum
• Leaves the bathroom with a subtle, lemon-fresh fragrance.
• Eradicates mould; hygienically cleans (kills 99.99% of germs); kills germs such as E. coli, Salmonella and Staphylococcus.
Size: 500mL
Keep out of reach of children. Read safety directions.
Corrosive. May produce severe burns. Attacks skin and eyes. Vapour may be harmful. May give off dangerous gas if mixed with other products.
Corrosive. May produce severe burns. Attacks skin and eyes. Vapour may be harmful. May give off dangerous gas if mixed with other products.
IMPORTANT INFORMATION
Bleaching and Colourfast Test: Spray undiluted in a hidden area and leave for 3 to 5 minutes and rinse off. If no change has occurred, use as directed.FIRST AID INFORMATION
For advice, contact a Poisons Information Centre (Phone 13 11 26 Australia; 0800 764 766 New Zealand) or a doctor. If swallowed do not induce vomiting. If in eyes, hold eyelids apart and flush the eye continuously with running water. Continue flushing until advised to stop by the Poisons Information Centre or a doctor, or for at least 15 minutes. If skin or hair contact occurs, remove contaminated clothing and flush skin and hair with running water.Sodium Hypochlorite 47g/L Available Chlorine 4.4%m/v. At use by date: Available Chlorine 1.8%m/v. Sodium Hydroxide 8g/L
Do not swallow.
Spray directly onto surface from a distance of 25cm. Leave for 5 minutes and then rinse thoroughly. For difficult stains and soap scum, scrub/wipe before rinsing of the solution.
Do not use on laminates, bare steel, stainless steel, marble, aluminium, unpainted metal or worn, chipped enamel in baths and basins. Do not refill bottle. Wash hands after use.
Spray directly onto surface from a distance of 25cm. Leave for 5 minutes and then rinse thoroughly. For difficult stains and soap scum, scrub/wipe before rinsing of the solution.
Do not use on laminates, bare steel, stainless steel, marble, aluminium, unpainted metal or worn, chipped enamel in baths and basins. Do not refill bottle. Wash hands after use.
SAFETY DIRECTIONS
Wear eye protection and gloves when using. Ensure adequate ventilation when using. Do not mix with hot water. Do not mix with detergents or other chemicals. Avoid contact with skin and eyes. Use only as directed.Storage Temperature: Below 25°C